Our products

How To Attach your Cabin Hooks And Secure Your Unit

HOW TO ATTACH YOUR SFL PRODUCT
THE INSTRUCTIONS ARE FOR ANY SMART FAB PRODUCT

WHEN FITTING ANY STRAPS
ALWAYS HAVE THE STRAP
LOWER THAN WHERE IT IS FIXED
ON YOUR UNIT
WHEN FITTING TO A PARK HOME
THE BEST PLACE IS AT THE VERY BOTTOM OF YOUR HOME AS THERE
IS A WOODEN OR COM POSIT BATTEN THAT RUNS ALL THE WAY AROUND YOUR HOME. WE ARE NOT TALKING ABOUT FROM THE GROUND UP TO THE START OF YOUR HOME, THIS IS USUALLY BOXED IN WITH BRICK, WOOD
OR PLASTIC.
WHEN SCREWED IN PULL STRAP FOR
A BIT OF TENSION AND PUT EXCESS STRAP IN CLIP ON THE STRAP
THIS WILL STOP THE UNIT LIFTING 

THE SAME FITTING INSTRUCTIONS APPLY WHEN FITTING ANY OF OUR UNITS TO A
(HOUSE) (PARKHOME) (FENCE) (SHED) ANYTHING.

SMART FAB LTD CANNOT TAKE OR ACCEPT LIABILITY FOR PRODUCT
DAMAGE AFTER THE DAY OF DELIVERY IF THE CABIN HOOKS AREN’T ATTACHED
FITTED CORRECTLY, IN A TIMELY MANNER

 HOW TO FIX YOUR CABIN HOOKS
THE INSTRUCTIONS ARE FOR ANY SMART FAB PRODUCT

WHEN FITTING ANY CABIN HOOKS
ALWAYS HAVE THE HOOK PLATE
HIGHER THEN THE EYE PLATE
.see picture 2

WHEN FITING TO A PARKHOME
THE BEST PLACE IS AT THE VERY
BOTTOM OF YOUR HOME AS THERE
IS A WOODEN OR COMPOSIT BATON
THAT RUNS ALL THE WAY AROUND
YOUR HOME see picture 4

LOTS OF PARKHOMES ARE BOXED IN
WITH BRICK OR PLASIC DO
NOT ATTACH TO THIS

FIT THE CABIN HOOK TO THE BACK SIDE OF THE
UNIT NEXT TO THE TRIM see picture 1
THEN, PUT THE EYELET ONTO THE CABIN
HOOK AND SLIDE DOWN TO THE BATON AROUND
YOUR HOME WITH A BIT OF TENSION,
THIS WILL STOP THE UNIT LIFTING, ATTACH
THE EYELET TO THE WOODEN BATON. see picture 3
THE SAME FITTING INSTRUCTIONS APPLY WHEN FITTING ANY OF OUR UNITS TO A
(HOUSE) (PARKHOME) (FENCE) (SHED) ANYTHING.

SMART FAB LTD CANNOT TAKE OR ACCEPT LIABILITY FOR PRODUCT
DAMAGE AFTER THE DAY OF DELIVERY IF THE CABIN HOOKS AREN’T ATTACHED
FITTED CORRECTLY, IN A TIMELY MANNER